Radon Testing in Medford, MN.
EPA-protocol 48-hour radon testing in Medford, Steele County. Steele County is in an elevated-radon zone — we deploy a continuous-monitor on inspection day and integrate results into your report. Mitigation referrals if needed.
Why Medford homes especially need radon testing.
Steele County sits squarely in the elevated-radon zone the Minnesota Department of Health has mapped across southern Minnesota. Roughly 2 in 5 Minnesota homes test above the EPA action level of 4.0 pCi/L, and the older basement and slab construction common in Medford only increases the risk. The good news: testing is fast, mitigation is straightforward, and most Medford buyers can resolve a high reading before closing.
EPA-protocol 48-hour test
Continuous-monitor deployment under closed-house conditions, hour-by-hour readings, retrieved 48 hours later. Results integrated into your full inspection report.
Medford closing timeline-friendly
We deploy on inspection day so you don't lose a separate trip. Most Medford purchase agreements allow time for a 48-hour radon test without delaying closing.
Mitigation referrals
If your Medford home tests above 4.0 pCi/L, we refer you to MN Department of Health certified mitigation contractors. Most systems are installed in a single day.
Rural Medford properties
Rural homes on private wells and septic in Steele County often have higher radon entry from sub-slab pathways. We adapt the test deployment to the property type.
Common questions.
Do Medford, MN homes really need radon testing?
Yes. Steele County sits in an elevated-radon zone per the Minnesota Department of Health. About 2 in 5 Minnesota homes test above the EPA action level of 4.0 pCi/L, and Medford's housing stock includes plenty of older basement and slab construction that increases entry-point risk.
How long does the test take in Medford?
A standard EPA short-term radon test runs for a minimum of 48 hours under closed-house conditions. We deploy a continuous-monitor on inspection day and retrieve it 48 hours later. Results are integrated into your inspection report.
What's the EPA action level?
4.0 picocuries per liter (pCi/L). EPA recommends mitigation if your home tests at or above this level. The Minnesota Department of Health recommends considering mitigation between 2.0–3.9 pCi/L as well.
What if my Medford home tests high?
Most homes are mitigated with a sub-slab depressurization system installed in a single day by an MDH-certified contractor. We refer you to qualified mitigators serving Steele County.
Can I bundle this with a home inspection in Medford?
Yes — radon testing is the most-requested add-on with our Medford home inspections. Use the Instant Free Quote tool to add it to your booking.
Other services and locations.
Radon Testing (overview)
The full radon testing service page — what it includes, how it works.
Medford Home Inspection
Full home inspection coverage for every Medford neighborhood.
4-Point Inspection in Medford
4-Point Inspection for Medford homeowners — same inspector, same standards.
Sewer Scope Inspection in Medford
Sewer Scope Inspection for Medford homeowners — same inspector, same standards.
Radon Testing in Owatonna
Same radon testing for Owatonna homeowners.
Radon Testing in Faribault
Same radon testing for Faribault homeowners.